NSN 5305-00-135-7213
High Torque Screw
Between 2.051 inches and 2.081 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 7S35-4-28 for national stock number 5305001357213.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-135-7213.
-
MPN or Model
7S35-4-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 2.051 inches and 2.081 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.066 inches and 0.076 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.925 inches and 1.975 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-040-9458 MPN 192-63799-1Bellcrank Assemblyx
- 1560-00-048-2178 MPN 55-20004-1Fillet Rh
- 1560-00-092-4379 MPN 55-58518Hydra Line Assembly
- 1560-00-109-7689 MPN 88-31002-18Aircraft Cowling
- 1680-00-307-2286 MPN 140-53043-3Pilots Ejecti Guide
- 4920-00-522-2213 MPN E2845Aircraft Maintenance Fixture
- 1680-00-966-9908 MPN 6027-501Back-seat Panel Assy
- 4920-01-164-4774 MPN R-TBD-560Aircraft Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-135-7213 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S35-4-28 | Boeing Company, The |
7S35-4-28 | Boeing Company, The |
Stock Check
- SV: 1