NSN 5305-00-137-3270
Bolt Stove
Furnish one silicone rubber o ring,bearing surface of head undercut for o ring.
Manufacturer part number SFR8-32NC2A5-8 for national stock number 5305001373270.
Datasheet
-
Product description
Machine Screw NSN 5305-00-137-3270.
-
MPN or Model
SFR8-32NC2A5-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.470 inches and 0.553 inches -
Fastener Length
Between 0.594 inches and 0.625 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.300 inches and 0.332 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Stainless steel or steel -
Screw Material Specification
Qq-s-763 federal specification 1st material response or 66 federal standard 1st material response or comp 16-18 or 18-8 assn standard 2nd material response -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-263-1155 MPN 102518-91Radio Frequency Coil
- 5950-00-283-7375 MPN T050-041-0002Power Transformer
- 5950-00-448-9726 MPN 336-300-002Saturable Reactor
- 5935-00-810-0442 MPN 373-099-458Electrical Plug Connector
- 5930-00-856-3371 MPN 355-011-021Toggle Switch
- 4920-01-196-5977 MPN 3308047-3Cover Pad
- 5905-00-104-5755 MPN 311-008-100Composition Fixed Resistor
- 5950-01-423-1524 MPN 331-950-003Reactor
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-137-3270 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFR8-32NC2A5-8 | A P M Hexseal Corporation |
S010-004-0810 | Interstate Electronics Corporation |