NSN 5305-00-137-3273
Bolt Stove
Furnish one silicone rubber o ring,bearing surface head undercut for o ring.
Manufacturer part number SFR4-40NC2A5-16 for national stock number 5305001373273.
Datasheet
-
Product description
Machine Screw NSN 5305-00-137-3273.
-
MPN or Model
SFR4-40NC2A5-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.183 inches and 0.272 inches -
Fastener Length
Between 0.281 inches and 0.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.200 inches and 0.225 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Stainless steel -
Screw Material Specification
Qq-s-763, 300 series federal specification single material response or 66, 300 series federal standard single material response or comp 16-18 or 18-8 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-974-7782 MPN 3041259-1Electrical Receptacle Connector
- 5905-00-984-7704 MPN 313-001-035Inductive Wire Wound Fixed Resistor
- 5930-01-035-5184 MPN 499-038-116Toggle Switch
- 5935-01-119-5091 MPN 373-043-034Electrical Receptacle Connector
- 5905-01-176-7354 MPN 7443300 FIND NO 057Film Fixed Resistor
- 5930-01-229-6463 MPN 07-00337-002Code Indicating Wheel Switch
- 5950-01-399-1558 MPN T050-938-0001Power Transformer
- 5935-01-487-0088 MPN 373-216-222Plug Dummy Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-137-3273 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFR4-40NC2A5-16 | A P M Hexseal Corporation |
S010-004-0405 | Interstate Electronics Corporation |