NSN 5305-00-139-7111
High Torque Screw
Between 1.356 inches and 1.376 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number CA4710-0415 for national stock number 5305001397111.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-139-7111.
-
MPN or Model
CA4710-0415
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.292 inches and 0.313 inches -
Fastener Length
Between 1.356 inches and 1.376 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.063 inches and 1.064 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-004-2871 MPN A51M20636-11Spring Interlock Tumbler Guide
- 1680-00-019-8165 MPN 123AMM40205-1Winch Suppo Fitting
- 5935-00-089-6966 MPN GC800AP18-14PElectrical Plug Connector
- 1560-00-097-6197 MPN 128W10517-13Weld Assembly
- 5935-00-153-7889 MPN GA800RS5-4Electrical Connector Cable Clamp
- 5935-00-158-4891 MPN GA800RW7Electrical Connector Backshell
- 5935-00-240-7373 MPN GS806P1Plug-in Electronic Components Socket
- 1560-00-251-3850 MPN 128B11411-31Aircraft Skin
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-139-7111 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA4710-0415 | Arconic Global Fasteners & Rings, |
GB510K4-15 | Northrop Grumman Systems Corporation |
AS109-04-15 | Avibank Mfg., Inc. |
VP1120-4-15 | Alcoa Global Fasteners, Inc. |
CA4740-04-15 | Arconic Global Fasteners & Rings, |
CA4710-0415 | Arconic Global Fasteners & Rings, |
GB510K4-15 | Northrop Grumman Systems Corporation |
AS109-04-15 | Avibank Mfg., Inc. |
VP1120-4-15 | Alcoa Global Fasteners, Inc. |
CA4740-04-15 | Arconic Global Fasteners & Rings, |