NSN 5305-00-140-7265
Bolt Stove
Between 0.156 inches and 0.188 inches fastener length, flat countersunk head style, between 0.099 inches and 0.119 inches head diameter, internal drive style: slot.
Manufacturer part number 9157793-2 for national stock number 5305001407265.
Datasheet
-
Product description
Machine Screw NSN 5305-00-140-7265.
-
MPN or Model
9157793-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
133300 - Machinery/machines NOI -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.096 inches and 0.153 inches -
Fastener Length
Between 0.156 inches and 0.188 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.099 inches and 0.119 inches -
Internal Drive Style
Slot -
Thread Diameter
0.060 inches -
Thready Qty Per Inch (tpi)
80 -
Min. Tensile Strength (psi)
90000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 316 or steel comp 316l -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
171, finish no. 5.4.1 military standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-224-3175 MPN 7627831Electrical Receptacle Connector
- 5935-00-229-7634 MPN 10243978-3Electrical Plug Connector
- 5935-00-244-0935 MPN MIS-12848Electrical Receptacle Connector
- 5905-00-279-7069 MPN 8515570Film Fixed Resistor
- 5935-00-283-2064 MPN 10187835Electrical Receptacle Connector
- 5975-00-317-4782 MPN 10044616Blank End Fitting
- 5945-00-377-7386 MPN 10167806Electromagnetic Relay
- 5935-00-456-1779 MPN 10112509-2Electrical Plug Connector Body
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-140-7265 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9157793-2 | U S Army Aviation And Missile |