NSN 5305-00-141-4883
Bolt Stove
0.500 inches fastener length, flat countersunk head style, between 0.359 inches and 0.385 inches head diameter, internal drive style: slot.
Manufacturer part number AN507C1032-8 for national stock number 5305001414883.
Datasheet
-
Product description
Machine Screw NSN 5305-00-141-4883.
-
MPN or Model
AN507C1032-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.355 inches and 0.366 inches -
Fastener Length
0.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.359 inches and 0.385 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Screw Material
Steel comp 430 or steel comp 302 or steel comp 303 or steel comp 303se -
Screw Material Specification
Qq-s-763, class 4 federal specification 1st material response or mil-s-7720 military specification 2nd material response or mil-s-7720 military specification 3rd material response or mil-s-18732 military specification 4th material response -
Screw Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-497-1926 MPN AN3050-16Electrical Conduit Ferrule
- 5930-00-636-0483 MPN AN3022-8BToggle Switch
- 5935-00-644-6757 MPN AN3106A36-8PElectrical Plug Connector
- 5935-01-226-5624 MPN AN3102C20-7PWElectrical Receptacle Connector
- 5935-00-222-7829 MPN AN3106A28-12PYElectrical Plug Connector
- 5305-00-144-3737 MPN AN520-8R10Machine Screw
- 5305-00-144-3775 MPN AN515-416R12Machine Screw
- 5305-00-144-3956 MPN AN507-632R16Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-141-4883 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN507C1032-8 | Aeronautical Standards Group |