NSN 5305-00-143-0429
High Torque Screw
Furnished w/1 preformed packing.
Manufacturer part number 3M47-7-19 for national stock number 5305001430429.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-0429.
-
MPN or Model
3M47-7-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.530 inches and 0.697 inches -
Fastener Length
Between 1.828 inches and 1.875 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.881 inches and 0.888 inches -
Head Height
Between 0.130 inches and 0.133 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-017-9367 MPN 53-65050-5Aircraft Gearbox Assembly
- 1560-00-073-1818 MPN 53-61011-17Dual Controls Cover
- 1560-00-076-4681 MPN 32-31536-17Fuselage Stiffener
- 1560-00-145-5839 MPN 32-35214-209Airframe Angle
- 1680-00-147-3636 MPN 32G60057-109Instrum Glareshield
- 4920-00-152-6651 MPN 68D240021-1001Pneumatic System Components Test Set
- 1560-00-172-7598 MPN 53G970530-7Aircraft Skin
- 1560-00-173-3936 MPN 53G970803-11Aircraft Slat
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-0429 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M47-7-19 | Boeing Company, The |
HT403A7-19 | Alcoa Fastening Systems |
HT403A7-19 | Alcoa Global Fasteners, Inc. |