NSN 5305-00-143-0440
High Torque Screw
Primer applied to screw per fscm 76301,process spec p. S. 13421.
Manufacturer part number 3MFR1503-6 for national stock number 5305001430440.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-0440.
-
MPN or Model
3MFR1503-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.214 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4130 -
Material Specification
66 federal standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-089-4077 MPN 32-831558-313Special Purpose Thermal Insulation
- 1560-00-137-7623 MPN 32-24024-5Rudder Ballast Balance Weight
- 1560-00-302-3684 MPN 68A116153-1001Aileron Actuator Support Fitting
- 1560-00-458-3159 MPN 32-421500-303Aircraft Door
- 1560-00-473-4323 MPN 32-32028-13Bulkhead Cruciform
- 1560-00-491-7493 MPN 53-310348-1Armor Plate
- 1560-00-499-7825 MPN 32-11014-51Post Auxiliary Beam
- 1560-00-511-4996 MPN 53-73203-5Aircraft Access Cover
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-0440 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFR1503-6 | Boeing Company, The |