NSN 5305-00-143-0447
High Torque Screw
Primer applied to screw per fscm 76301,process spec p. S. 13421.
Manufacturer part number 3MA1503-8 for national stock number 5305001430447.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-0447.
-
MPN or Model
3MA1503-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.214 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 102.0 degrees -
Material
Steel comp 4130 -
Material Specification
66 federal standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-013-2114 MPN MDE32593-13Stop Indicator
- 1560-00-034-6206 MPN 32-84085-1Shell Assembly Hook
- 1560-00-145-5816 MPN 32-35214-121Aircra Rubber Strip
- 1560-00-245-9734 MPN 68A321226-2201Aircraft Skin
- 1560-00-253-9803 MPN 68A318024-2029Aircraft Skin
- 1560-00-279-6240 MPN 68A351028-2003Canopy Support
- 1560-00-518-2786 MPN 32-15539-25Aircraft Spar
- 1560-00-518-8764 MPN 53G970818-18Access Door Sill
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-0447 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MA1503-8 | Boeing Company, The |
3MFR1503-8 | Boeing Company, The |