NSN 5305-00-143-0449
High Torque Screw
Primer applied to screw per fscm 76301,process spec p. S. 13421.
Manufacturer part number 3MA1505-4 for national stock number 5305001430449.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-0449.
-
MPN or Model
3MA1505-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.292 inches -
Fastener Length
Between 0.610 inches and 0.640 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.938 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 90.0 degrees and 102.0 degrees -
Material
Steel comp 4130 -
Material Specification
66 federal standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-9100 MPN NAS1191E04P20LSocket Head Cap Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-721-9403 MPN HT164AR-11Machine Screw
- 5305-00-820-2383 MPN NAS1101-3H12Machine Screw
- 5305-00-837-8782 MPN 51B221-17Machine Screw
- 5305-00-929-4089 MPN NAS1101C04-3Machine Screw
- 5305-00-935-7579 MPN 3M50-4-19Shoulder Screw
- 5305-01-140-4794 MPN 3M707-4D8-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-0449 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MA1505-4 | Boeing Company, The |
3MFR1505-4 | Boeing Company, The |
3MA1505-4 | Hi-shear Corporation |
3MA1505-4 | Sps Technologies, Llc |
3MA1505-4 | Alcoa Global Fasteners, Inc. |
3MA1505-4 | Lisi Aerospace Canada Corp |