NSN 5305-00-143-1833
Adjustment Screw Valve
About this product
Unthreaded shank undercutto 0.115 in. Min,0.125 in. Max dia.
Manufacturer part number 308R794H01 for national stock number 5305001431833.
Datasheet
-
Product description
Setscrew NSN 5305-00-143-1833.
-
MPN or Model
308R794H01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.170 inches and 0.210 inches -
Fastener Length
Between 0.800 inches and 0.840 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.262 inches and 0.270 inches -
Head Height
Between 0.159 inches and 0.164 inches -
Point Length
Between 0.160 inches and 0.200 inches -
Point Diameter
Between 0.115 inches and 0.125 inches -
Point Style
Dog -
Internal Drive Style
Hexagon -
Thread Diameter
0.164 inches -
Width Across Flats
Between 0.140 inches and 0.142 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 45.0 rockwell c -
Minimum Yield Strength
130000 pounds per square inch -
Material
Steel -
Material Specification
66 federal standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification all treatment responses -
Thread Series Designator
Unc
More from these suppliers
- 5985-00-074-0999 MPN 604R869G01Waveguide Support
- 5935-00-088-1867 MPN 575R889H13Electrical Plug Connector
- 5940-00-234-7484 MPN 1JB6114-1Terminal Board
- 5985-00-624-0159 MPN 475D101G01REVARadio Frequency Transmission Line Section
- 5905-00-818-5712 MPN 2JC2779H41Nonprecision Nonwire Wound Variable Resistor
- 5935-00-826-8967 MPN 579R720H01Electrical Receptacle Connector
- 5950-00-834-9242 MPN 5487108H48REVFRadio Frequency Coil
- 5950-01-088-0988 MPN 593R230A01Inductor Assembly
Setscrew
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-1833 setscrewManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
308R794H01 | Northrop Grumman Systems Corporation |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.