NSN 5305-00-143-1846
High Torque Screw
Between 1.312 inches and 1.359 inches fastener length, flat countersunk head style, between 0.527 inches and 0.560 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 106334-6-15 for national stock number 5305001431846.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-1846.
-
MPN or Model
106334-6-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.365 inches and 0.432 inches -
Fastener Length
Between 1.312 inches and 1.359 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.527 inches and 0.560 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.927 inches and 0.947 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 101.5 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-100-6586 MPN NAS1221-06-2PMachine Screw
- 5305-00-146-7189 MPN 64040V5-8Close Tolerance Screw
- 5305-00-242-9124 MPN 66117H5-8Close Tolerance Screw
- 5305-00-243-8319 MPN NAS1101E4-6Machine Screw
- 5305-00-324-8487 MPN 110179-3-5Close Tolerance Screw
- 5305-00-492-8753 MPN NAS1101-08-8BMachine Screw
- 5305-00-590-7737 MPN 20097L96C6Socket Head Cap Screw
- 5305-00-754-2071 MPN NAS1203-9Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-1846 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106334-6-15 | Sps Technologies, Llc |
202-15522-6-15 | Triumph Aerostructures, Llc |
106334-6-15 | Sps Technologies, Llc |