NSN 5305-00-143-1847
High Torque Screw
Between 1.375 inches and 1.422 inches fastener length, flat countersunk head style, between 0.527 inches and 0.560 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 106334-6-16 for national stock number 5305001431847.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-1847.
-
MPN or Model
106334-6-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.365 inches and 0.432 inches -
Fastener Length
Between 1.375 inches and 1.422 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.527 inches and 0.560 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-225-9874 MPN SFH22D6A12Machine Screw
- 5305-00-364-9543 MPN HT4025L3-6Close Tolerance Screw
- 5305-00-487-5277 MPN 64040H4-9Close Tolerance Screw
- 5305-00-508-5026 MPN LS15267V3-11Machine Screw
- 5305-00-510-5285 MPN 15263V3-10Machine Screw
- 5305-00-842-7561 MPN 66117H6-12Close Tolerance Screw
- 5305-00-904-8892 MPN 38030-96C10CSocket Head Cap Screw
- 5305-01-032-3465 MPN LS15264-06-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-1847 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106334-6-16 | Sps Technologies, Llc |
202-15522-6-16 | Triumph Aerostructures, Llc |
106334-6-16 | Sps Technologies, Llc |