NSN 5305-00-143-1861
High Torque Screw
Between 1.499 inches and 1.546 inches fastener length, flat countersunk head style, between 0.634 inches and 0.668 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number 106334-7-17 for national stock number 5305001431861.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-1861.
-
MPN or Model
106334-7-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.427 inches and 0.494 inches -
Fastener Length
Between 1.499 inches and 1.546 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.634 inches and 0.668 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.437 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-541-9194 MPN 106706T7-13Close Tolerance Screw
- 5305-00-815-4779 MPN NAS1204-21Close Tolerance Screw
- 5305-00-983-6652 MPN 20097-3F12CSocket Head Cap Screw
- 5305-01-043-8057 MPN 67077-3-9Close Tolerance Screw
- 5305-01-073-2531 MPN ST3M495-4-9-1Shoulder Screw
- 5305-01-084-4698 MPN HT4016-4-4XShoulder Screw
- 5305-01-111-2767 MPN NAS1221-3E8Machine Screw
- 5305-01-143-2829 MPN HT4009-3-16Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-143-1861 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106334-7-17 | Sps Technologies, Llc |
202-15522-7-17 | Triumph Aerostructures, Llc |
106334-7-17 | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)