NSN 5305-00-143-1862
High Torque Screw
Between 1.624 inches and 1.671 inches fastener length, flat countersunk head style, between 0.634 inches and 0.688 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number 202-15522-7-19 for national stock number 5305001431862.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-1862.
-
MPN or Model
202-15522-7-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.427 inches and 0.494 inches -
Fastener Length
Between 1.624 inches and 1.671 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.634 inches and 0.688 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.437 inches -
Grip Length
Between 1.177 inches and 1.197 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 101.5 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-931-5294 MPN C082-4-23Machine Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-097-8221 MPN HT4067-4-9AClose Tolerance Screw
- 5305-01-131-2204 MPN HT8137-6-16ASClose Tolerance Screw
- 5305-01-147-4040 MPN HT4049-4-7Close Tolerance Screw
- 5305-01-254-2565 MPN 3M963-4L8Close Tolerance Screw
- 5305-01-288-5724 MPN VT1754-8-14Close Tolerance Screw
- 5305-01-300-8917 MPN 3M1034V4-12-39Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-1862 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
202-15522-7-19 | Triumph Aerostructures, Llc |
106334-7-19 | Sps Technologies, Llc |
106334-7-19 | Sps Technologies, Llc |
202-15522-7-19 | Arconic Global Fasteners & Rings, |