NSN 5305-00-143-3409
High Torque Screw
Between 0.760 inches and 0.790 inches fastener length, flat chamfer head style, between 0.306 inches and 0.313 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number 7S32-3A7 for national stock number 5305001433409.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-3409.
-
MPN or Model
7S32-3A7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.312 inches and 0.362 inches -
Fastener Length
Between 0.760 inches and 0.790 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.306 inches and 0.313 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-109-3893 MPN 55-33468Brake Cable An Link
- 1560-00-332-9891 MPN 151-48193-11Outer Wind Fuel Cell Ring
- 1560-00-525-3772 MPN 165-16001-101Aileron
- 1680-00-874-9379 MPN 5997-12Seat Armcap Cover
- 1680-00-877-4024 MPN 8-68115-2Seat Shroud Assy
- 1560-01-044-6187 MPN 265-311141-5Fuselage Bulkhead Assembly
- 1560-01-166-1213 MPN L5338385-031Aircraft Structural Component Support
- 1560-01-189-2588 MPN L5351317-001Air Inlet Valve
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-143-3409 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S32-3A7 | Boeing Company, The |