NSN 5305-00-143-9756
High Torque Screw
Between 2.640 inches and 2.687 inches fastener length, flat countersunk head style, between 0.329 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 53B333-36 for national stock number 5305001439756.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-143-9756.
-
MPN or Model
53B333-36
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 2.640 inches and 2.687 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.329 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-001-2138 MPN 14-60444-1Electrical-electronic Equipment Control Panel
- 1560-00-073-2761 MPN 7-11303-2Aircraft Access Cover
- 1560-00-949-1927 MPN 6-27200-502Aircraft Leading Edge
- 1560-01-014-8510 MPN 18-10629-28Aircraft Access Door
- 1560-01-215-1706 MPN 2-10805-11Aircraft Former
- 1560-00-862-8559 MPN 7-74001-29Aileron Cable Assy
- 1560-00-960-7956 MPN 3-13108-3Support Rod
- 1560-00-153-3163 MPN 3-64501-1Angle Of Attack Indexer Cover
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-143-9756 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53B333-36 | Northrop Grumman Technical Services, |
53B333-36 | Northrop Grumman Systems Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)