NSN 5305-00-144-0309
High Torque Screw
Between 1.112 inches and 1.159 inches fastener length, flat countersunk head style, between 0.362 inches and 0.394 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 106334-4-13 for national stock number 5305001440309.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-144-0309.
-
MPN or Model
106334-4-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 1.112 inches and 1.159 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.362 inches and 0.394 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-369-2088 MPN NAS1101E08-6Machine Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-00-922-9030 MPN 504465Externally Relieved Body Screw
- 5305-01-054-6264 MPN AIC985-4-11PClose Tolerance Screw
- 5305-01-059-3571 MPN NAS1102-08-7BMachine Screw
- 5305-01-097-8213 MPN AIC1023H10-10Close Tolerance Screw
- 5305-01-105-9372 MPN HT4068-3-13AClose Tolerance Screw
- 5305-01-303-9653 MPN 3M1165-3-3FClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-144-0309 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106334-4-13 | Sps Technologies, Llc |
202-15522-4-13 | Triumph Aerostructures, Llc |
106334-4-13 | Sps Technologies, Llc |
202-15522-4-13 | Arconic Global Fasteners & Rings, |
202-15522-4-13 | Sps Technologies, Llc |
202-15522-4-13 | Huck Intl Inc |
202-15522-4-13 | Huck International, Inc. |