NSN 5305-00-144-1446
High Torque Screw
Between 0.385 inches and 0.432 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 106334-3-2 for national stock number 5305001441446.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-144-1446.
-
MPN or Model
106334-3-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 0.385 inches and 0.432 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.192 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-310-5920 MPN AIC811-04-15Socket Head Cap Screw
- 5305-00-840-3538 MPN 51B334-4Close Tolerance Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-076-8100 MPN AIC813-00-8Machine Screw
- 5305-01-171-0555 MPN HT4024L3-21Close Tolerance Screw
- 5305-01-196-5089 MPN C9535-7-38Close Tolerance Screw
- 5305-01-330-2553 MPN AIC4463-3-9Machine Screw
- 5305-01-363-8844 MPN 3D0150-3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-144-1446 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106334-3-2 | Sps Technologies, Llc |
BA45132-3-2 | Huck International, Inc. |
AIC83-3-2 | Sps Technologies, Llc |
VT1631-3-2 | Alcoa Global Fasteners, Inc. |
106334-3-2 | Sps Technologies, Llc |
202-15522-3-2 | Triumph Aerostructures, Llc |
BA45132-3-2 | Huck Intl Inc |