NSN 5305-00-144-4096
High Torque Screw
O-ring included.
Manufacturer part number HT4UA47 for national stock number 5305001444096.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-144-4096.
-
MPN or Model
HT4UA47
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
3.407 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.502 inches and 0.506 inches -
Head Height
Between 0.071 inches and 0.073 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
2.938 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp 4130 or steel comp 4140 or steel comp 4340 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 ty ii cl b federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-059-4857 MPN NAS1101-02-5Machine Screw
- 5305-00-138-7032 MPN 16990L4F12Socket Head Cap Screw
- 5305-00-143-2722 MPN 64564-3-1Close Tolerance Screw
- 5305-00-182-9380 MPN CVC241-3-13Machine Screw
- 5305-00-233-6065 MPN 106385PT3-15Close Tolerance Screw
- 5305-00-432-4663 MPN NAS1124-12Close Tolerance Screw
- 5305-00-493-6311 MPN 2-56NC3AX5-32Setscrew
- 5305-00-519-7204 MPN HT4024L3D6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-144-4096 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4UA47 | Hi-shear Corporation |
54266-4-47 | Sps Technologies, Llc |
HT408A4-47 | Alcoa Global Fasteners, Inc. |
HT408A4-47 | Alcoa Fastening Systems |
HT4UA47 | Alcoa Fastening Systems |
54266-4-47 | Sps Technologies, Llc |
3M46-4-47 | Boeing Company, The |