NSN 5305-00-149-9956
High Torque Screw
Between 1.454 inches and 1.500 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number NAS335-13 for national stock number 5305001499956.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-149-9956.
-
MPN or Model
NAS335-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.562 inches -
Fastener Length
Between 1.454 inches and 1.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.312 inches -
Grip Length
0.938 inches -
Width Across Flats
Between 0.188 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.469 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium head and chromate head -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response threads -
Thread Series Designator
Unf -
Specification Data
80205-nas335 professional/industrial association standard
More from these suppliers
- 5940-01-425-6044 MPN NAS1063A5-438Terminal Board Marker Strip
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-007-6198 MPN NAS1631C26PMachine Screw
- 5305-00-007-6198 MPN NAS1631E26PMachine Screw
- 5305-00-007-9894 MPN NAS1102E04-10PMachine Screw
- 5305-00-008-2104 MPN NAS1100C02-6PMachine Screw
- 5305-00-008-9049 MPN NAS1743C4T16USocket Head Cap Screw
- 5305-00-044-4246 MPN NAS1623-8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-149-9956 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335-13 | National Aerospace Standards |