NSN 5305-00-150-3263
High Torque Screw
Between 0.987 inches and 1.034 inches fastener length, flat countersunk head style, between 0.362 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number AIC83-4A11 for national stock number 5305001503263.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-150-3263.
-
MPN or Model
AIC83-4A11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 0.987 inches and 1.034 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.362 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.677 inches and 0.697 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.854 inches first hole and 0.934 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-450-5971 MPN AIC1023V4-11Close Tolerance Screw
- 5305-00-809-1737 MPN 51B333-15Close Tolerance Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-158-6763 MPN AIC944-3-16Machine Screw
- 5305-01-201-9380 MPN AIC813-3-R11Machine Screw
- 5305-01-218-4548 MPN BACB30LR4U22Close Tolerance Screw
- 5305-01-284-8757 MPN VT1694F4-18Close Tolerance Screw
- 5305-01-328-9227 MPN AIC1700-3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-150-3263 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC83-4A11 | Sps Technologies, Llc |
106334-4-11D | Sps Technologies, Llc |
VT1631-4-11T | Alcoa Global Fasteners, Inc. |
BA45132-4A11 | Huck International, Inc. |
202-15522-4A11 | Triumph Aerostructures, Llc |
BA45132-4A11 | Huck Intl Inc |
106334-4-11D | Sps Technologies, Llc |