NSN 5305-00-150-3264
High Torque Screw
Between 0.510 inches and 0.557 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BA45132-3A4 for national stock number 5305001503264.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-150-3264.
-
MPN or Model
BA45132-3A4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 0.510 inches and 0.557 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.377 inches first hole and 0.456 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-811-6789 MPN 53B334-15Machine Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-00-902-4361 MPN NAS1102-02-5Machine Screw
- 5305-01-246-3864 MPN AIC811-04-21Socket Head Cap Screw
- 5305-01-417-2494 MPN TX1026V3-15AClose Tolerance Screw
- 5305-01-435-3159 MPN BACB30LU6-25Close Tolerance Screw
- 5305-01-435-8521 MPN BACB30LU9-41Close Tolerance Screw
- 5305-01-627-3549 MPN JSFB34V3-12DMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-150-3264 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BA45132-3A4 | Huck International, Inc. |
AIC83-3A4 | Sps Technologies, Llc |
106334-3-4D | Sps Technologies, Llc |
VT1631-3-4T | Alcoa Global Fasteners, Inc. |
202-15522-3A4 | Arconic Global Fasteners & Rings, |
202-15522-3A4 | Huck Intl Inc |
202-15522-3A4 | Triumph Aerostructures, Llc |
BA45132-3A4 | Huck Intl Inc |
106334-3-4D | Sps Technologies, Llc |
202-15522-3A4 | Huck International, Inc. |