NSN 5305-00-150-9464
Bolt Stove
0.875 inches fastener length, fillister head style, between 0.250 inches and 0.270 inches head diameter, head height: between 0.106 inches and 0.113 inches .
Manufacturer part number AN502-8-14 for national stock number 5305001509464.
Datasheet
-
Product description
Machine Screw NSN 5305-00-150-9464.
-
MPN or Model
AN502-8-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.725 inches and 0.844 inches -
Fastener Length
0.875 inches -
Head Style
Fillister -
Head Diameter
Between 0.250 inches and 0.270 inches -
Head Height
Between 0.106 inches and 0.113 inches -
Hole Diameter
0.046 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Hole Quantity
1 -
Thready Qty Per Inch (tpi)
36 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Screw Material
Steel comp 8630 -
Screw Material Specification
Mil-s-6050 military specification single material response or an-s-9 military standard single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Head Hole Configuration Style
Round -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-272-1412 MPN AN3233-5Sensitive Switch Housing
- 4820-00-287-2871 MPN AN5830-4Check Valve
- 4820-00-684-0244 MPN AN6277-10Shuttle Valve
- 5935-00-148-9307 MPN AN3108B14S9PElectrical Plug Connector
- 5925-00-159-0274 MPN AN3161-20Circuit Breaker
- 5925-00-270-5924 MPN AN3161P15Circuit Breaker
- 5305-00-150-9329 MPN AN505DD8-40Machine Screw
- 5305-00-150-9475 MPN AN505-516R40Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-150-9464 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN502-8-14 | Aeronautical Standards Group |