NSN 5305-00-150-9756
Bolt Stove
Between 0.844 inches and 0.875 inches fastener length, flat countersunk head style, between 0.300 inches and 0.332 inches head diameter, internal drive style: slot.
Manufacturer part number AN505-8-14 for national stock number 5305001509756.
Datasheet
-
Product description
Machine Screw NSN 5305-00-150-9756.
-
MPN or Model
AN505-8-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.844 inches and 0.875 inches -
Fastener Length
Between 0.844 inches and 0.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.300 inches and 0.332 inches -
Internal Drive Style
Slot -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 1010 -
Screw Material Specification
Qq-s-671 federal specification single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-112-5231 MPN AN3021-2BToggle Switch
- 5935-00-201-6494 MPN AN3102E18-22SElectrical Receptacle Connector
- 5930-00-833-5123 MPN AN3234-2Sensitive Switch
- 5935-01-167-6148 MPN AN3057-12Electrical Connector Cable Clamp
- 5935-01-554-2551 MPN AN3057-4Electrical Connector Cable Clamp
- 5305-00-151-0363 MPN AN500A8-4Machine Screw
- 5305-00-151-0958 MPN AN500B6-5Machine Screw
- 5305-00-151-2277 MPN AN507-832R32Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-150-9756 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505-8-14 | Aeronautical Standards Group |