NSN 5305-00-150-9964
Bolt Stove
0.625 inches fastener length, flat countersunk head style, between 0.249 inches and 0.279 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505-6R10 for national stock number 5305001509964.
Datasheet
-
Product description
Machine Screw NSN 5305-00-150-9964.
-
MPN or Model
AN505-6R10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.562 inches and 0.625 inches -
Fastener Length
0.625 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.249 inches and 0.279 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5975-00-156-3347 MPN 410186-1Stuffing Tube
- 4820-00-203-7727 MPN 313258-1Angle Valve
- 4820-00-461-1544 MPN 513876-1Check Valve
- 5905-00-938-5324 MPN 412299-16Noninductive Wire Wound Fixed Resistor
- 5905-00-969-6844 MPN 412299-26Noninductive Wire Wound Fixed Resistor
- 4920-01-529-1785 MPN 3239AS300-1Cover And Lift Plat
- 6110-01-489-1484 MPN 212775-3Electrical System Protection Panel
- 5305-00-445-5064 MPN 509440-1024Socket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-150-9964 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505-6R10 | Aeronautical Standards Group |
FFS92ANDTYPE3ANDSTYLE2C | Federal Specifications |
1175-6-10 | Naval Air Warfare Center Aircraft |