NSN 5305-00-150-9968
Bolt Stove
1.125 inches fastener length, flat countersunk head style, between 0.249 inches and 0.279 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505-6R18 for national stock number 5305001509968.
Datasheet
-
Product description
Machine Screw NSN 5305-00-150-9968.
-
MPN or Model
AN505-6R18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.063 inches and 1.125 inches -
Fastener Length
1.125 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.249 inches and 0.279 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-196-4689 MPN NAF48134-8Connector Adapter
- 5950-01-048-5916 MPN 616237-8G Pulse Transformer
- 5945-01-189-8758 MPN 5SE00664-1RSpecial Relay
- 5905-01-258-7923 MPN 425681-2Inductive Wire Wound Fixed Resistor
- 5930-01-340-7409 MPN 6545B105-1Dust And Moisture Seal Boot
- 5925-00-620-5853 MPN N2562-43751-1Circuit Breaker
- 6110-00-643-4166 MPN 18-40880-3Motor Starter
- 5305-00-151-0203 MPN 1175-2-4Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-150-9968 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505-6R18 | Aeronautical Standards Group |
FFS92ANDTYPE3ANDSTYLE2C | Federal Specifications |
1175-6-18 | Naval Air Warfare Center Aircraft |