NSN 5305-00-151-0203
Bolt Stove
Between 0.219 inches and 0.250 inches fastener length, flat countersunk head style, between 0.150 inches and 0.172 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505-2R4 for national stock number 5305001510203.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-0203.
-
MPN or Model
AN505-2R4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.214 inches and 0.250 inches -
Fastener Length
Between 0.219 inches and 0.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.150 inches and 0.172 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Min. Tensile Strength (psi)
55 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification single material response or qq-s-631 federal specification single material response or qq-s-634 federal specification single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-176-6926 MPN 147690-02Terminal Board
- 5930-00-478-7752 MPN 14CAA2M1RXXX210Push&light I Switch
- 1680-00-540-3448 MPN 31556-011-00Flexible Shaft Assembly
- 5950-00-822-5607 MPN 124736-02Power Transformer
- 5975-00-993-7458 MPN 738785-05Flexible Metal Conduit Assembly
- 4920-01-248-6477 MPN LT6092-01Aircraft Maintenance Fixture
- 5935-01-055-4746 MPN 154741-05Electrical Connector
- 5935-01-359-8956 MPN 164267-21Electrical Connector Retaining Plate
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-0203 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505-2R4 | Aeronautical Standards Group |
Q6210-02-04 | Ge Aviation Systems Llc |
1175-2-4 | Naval Air Warfare Center Aircraft |