NSN 5305-00-151-0264
Bolt Stove
2.500 inches fastener length, flat countersunk head style, between 0.249 inches and 0.279 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505-6R40 for national stock number 5305001510264.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-0264.
-
MPN or Model
AN505-6R40
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.750 inches -
Fastener Length
2.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.249 inches and 0.279 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-818-3014 MPN 47254-149Lug Terminal
- 5945-01-189-8755 MPN 5SE00664-1WLSpecial Relay
- 5940-01-323-3546 MPN 427209-1Conductor Splice
- 4920-01-508-4771 MPN MX-11815/USM-636(V)Interface Device Adapter Assembly
- 1680-01-522-2514 MPN 522125-1Electrical-electronic Equipment Control Panel
- 4920-01-550-8550 MPN 2000AS540-1Interface Device Adapter Assembly
- 5305-00-138-6155 MPN 514754-7Vent Screw
- 5305-00-637-5600 MPN 1029ARC8Tapping Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-0264 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505-6R40 | Aeronautical Standards Group |
FFS92ANDTYPE3ANDSTYLE2 | Federal Specifications |
1175-6-40 | Naval Air Warfare Center Aircraft |