NSN 5305-00-151-0675
Bolt Stove
Between 1.516 inches and 1.562 inches fastener length, flat countersunk head style, between 0.686 inches and 0.762 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509-616R23 for national stock number 5305001510675.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-0675.
-
MPN or Model
AN509-616R23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.656 inches and 0.734 inches -
Fastener Length
Between 1.516 inches and 1.562 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.686 inches and 0.762 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8630 or steel comp 4037 -
Screw Material Specification
Mil-s-6050, c4 military specification 1st material response or an-s-9, c4 military standard 2nd material response -
Screw Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-192-1351 MPN AN3108B36-5PElectrical Plug Connector
- 5935-00-498-0810 MPN AN3102A28-11PElectrical Receptacle Connector
- 5935-00-636-9876 MPN AN3108M20-1SElectrical Plug Connector
- 5935-00-793-4982 MPN AN3057-6AElectrical Connector Backshell
- 5935-00-976-6244 MPN AN3106E28-21PElectrical Plug Connector
- 5935-00-189-1522 MPN AN3106B32-6SElectrical Plug Connector
- 5305-00-156-2906 MPN AN520B10R26Machine Screw
- 5305-00-282-3888 MPN AN565B4H3Setscrew
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-0675 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509-616R23 | Aeronautical Standards Group |