NSN 5305-00-151-2079
Bolt Stove
0.438 inches fastener length, flat countersunk head style, between 0.200 inches and 0.225 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN507-440R7 for national stock number 5305001512079.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-2079.
-
MPN or Model
AN507-440R7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.388 inches and 0.438 inches -
Fastener Length
0.438 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.200 inches and 0.225 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-197-9755 MPN AN5538-1Lug Terminal
- 5975-00-231-5896 MPN AN3055-28-16Electrical Conduit Adapter
- 5945-00-258-2775 MPN AN3391-2BElectromagnetic Relay
- 5935-00-259-7522 MPN AN3100A20-27SElectrical Receptacle Connector
- 5935-00-683-1621 MPN AN3108A28-22PElectrical Plug Connector
- 5935-01-265-4298 MPN AN3102E32-13PWElectrical Receptacle Connector
- 5305-00-045-7865 MPN AN507-440R36Machine Screw
- 5305-00-151-0382 MPN AN500A6-18Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-2079 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN507-440R7 | Aeronautical Standards Group |