NSN 5305-00-151-2091
Bolt Stove
Between 0.156 inches and 0.188 inches fastener length, flat countersunk head style, between 0.200 inches and 0.225 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN507-440R3 for national stock number 5305001512091.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-2091.
-
MPN or Model
AN507-440R3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.138 inches and 0.188 inches -
Fastener Length
Between 0.156 inches and 0.188 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.200 inches and 0.225 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-259-1634 MPN AN3106A28-4SElectrical Plug Connector
- 4820-00-516-3592 MPN AN6245AB4Safety Relief Valve
- 5935-01-220-1934 MPN AN3106A16-7PElectrical Plug Connector
- 5935-00-189-1504 MPN AN3101A14S1PElectrical Plug Connector
- 5305-00-271-5216 MPN AN502-8-8Machine Screw
- 5305-00-271-7230 MPN AN509P10R18Machine Screw
- 5305-00-282-2289 MPN AN505C2-2Machine Screw
- 5305-00-292-8599 MPN AN515PB4R14Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-2091 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN507-440R3 | Aeronautical Standards Group |