NSN 5305-00-151-2251
Bolt Stove
Between 0.281 inches and 0.312 inches fastener length, flat countersunk head style, between 0.150 inches and 0.172 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN510-2-5 for national stock number 5305001512251.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-2251.
-
MPN or Model
AN510-2-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.281 inches and 0.312 inches -
Fastener Length
Between 0.281 inches and 0.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.150 inches and 0.172 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
64 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5945-00-258-2775 MPN AN3391-2BElectromagnetic Relay
- 5935-00-295-5368 MPN UG20CUElectrical Plug Connector
- 4820-00-512-5926 MPN AN6017-1Check Valve
- 5935-00-665-8088 MPN AN3100A24-9SElectrical Receptacle Connector
- 5305-00-151-0680 MPN AN526-632-20Machine Screw
- 5305-00-151-2493 MPN AN510-8-8Machine Screw
- 5305-00-151-2819 MPN AN510B5R12Machine Screw
- 5305-00-156-2913 MPN AN520B10R48Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-2251 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN510-2-5 | Aeronautical Standards Group |