NSN 5305-00-151-2503
Bolt Stove
1.125 inches fastener length, flat countersunk head style, between 0.200 inches and 0.225 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505-4-18 for national stock number 5305001512503.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-2503.
-
MPN or Model
AN505-4-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.075 inches and 1.125 inches -
Fastener Length
1.125 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.200 inches and 0.225 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-201-8034 MPN AN3106A22-14SYElectrical Plug Connector
- 5935-00-201-8373 MPN AN3106A22-22PElectrical Plug Connector
- 5975-00-231-5892 MPN AN3055-22-10Electrical Conduit Adapter
- 5935-00-259-7416 MPN AN3108B22-11PElectrical Plug Connector
- 5935-00-280-2354 MPN 3057-20AElectrical Connector Cable Clamp
- 5935-00-299-7814 MPN AN3100A20-7SElectrical Receptacle Connector
- 5305-00-058-6836 MPN AN500AC4-6Machine Screw
- 5305-00-141-4883 MPN AN507C1032-8Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-2503 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505-4-18 | Aeronautical Standards Group |