NSN 5305-00-151-3584
Bolt Stove
1.125 inches fastener length, round head style, between 0.193 inches and 0.211 inches head diameter, head height: 0.086 inches .
Manufacturer part number AN515-4-18 for national stock number 5305001513584.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-3584.
-
MPN or Model
AN515-4-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.075 inches and 1.125 inches -
Fastener Length
1.125 inches -
Head Style
Round -
Head Diameter
Between 0.193 inches and 0.211 inches -
Head Height
0.086 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4920-00-169-2794 MPN 1C6255G01Aircraft Engine Maintenance Machining Fixture
- 4920-00-571-9088 MPN 21C1064G001Blades Protector
- 4920-00-703-9119 MPN 21C320Compressor Dummy Bar
- 4920-00-834-4129 MPN 1C5737G01Aircraft Engine Maintenance Fixture
- 4920-00-857-7496 MPN 21C1259P016Heater Probe Assy
- 4920-01-139-6604 MPN 3C3047G01Sub Assembly Stand Bracket
- 5905-01-249-7527 MPN J167P3572ANoninductive Wire Wound Fixed Resistor
- 4920-01-255-8060 MPN 3C3638G01Aircraft Maintenance Fixture
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-3584 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN515-4-18 | Aeronautical Standards Group |
21C1530-070 | General Electric Company |