NSN 5305-00-151-6152
High Torque Screw
Between 0.785 inches and 0.815 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LD112-0022-0206 for national stock number 5305001516152.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-6152.
-
MPN or Model
LD112-0022-0206
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 0.785 inches and 0.815 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758, cond d4 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-185-5038 MPN 88-31493-3Fuselage Co Bracket
- 4920-00-330-4185 MPN T1128Surfac Fixture Assy
- 1560-00-348-2207 MPN 161-48278Drop Fu Flange Assy
- 1560-00-732-9836 MPN 265-333333Main Landing Gear Hook Assembly
- 4920-01-157-2415 MPN 56A05000-001Test Program Set
- 4920-01-167-9492 MPN R-TBD-687Interface Device Test Fixture Assembly
- 1560-01-183-1954 MPN L1702002-012Aircraft Slat
- 1560-01-190-8229 MPN L1600002-011Aircraft Wing Spoiler
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-6152 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD112-0022-0206 | Boeing Company, The |