NSN 5305-00-151-7988
High Torque Screw
Retaining element in shank.
Manufacturer part number CA2630-0517 for national stock number 5305001517988.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-7988.
-
MPN or Model
CA2630-0517
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.357 inches -
Fastener Length
Between 1.540 inches and 1.560 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 1.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
Between 1.062 inches and 1.078 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.437 inches and 1.453 inches first hole -
Surface Finish
63.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-046-7992 MPN G194-3Aircraft Structural Component Fitting
- 4920-00-070-9855 MPN 128GT10161T7Bearing Swaging Tool
- 1560-00-075-3839 MPN 123CVM10214-1Safe Latch Assembly
- 1560-00-117-9923 MPN 128WSM34057-1Pin Guide
- 4820-00-239-6540 MPN A51E9070-3Directional Control Linear Valve
- 5950-00-258-6643 MPN A51J9000-3Reactor
- 1560-00-276-8667 MPN 123ABP10056-11Cover
- 1680-00-372-5552 MPN A51M9024-3Linear Irreversible Mechanism
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-7988 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2630-0517 | Arconic Global Fasteners & Rings, |
VP1119-5-17 | Alcoa Global Fasteners, Inc. |
AS108-05-17 | Avibank Mfg., Inc. |
511AE5-17 | Northrop Grumman Systems Corporation |
CA2630-0517 | Arconic Global Fasteners & Rings, |
511AE5-17 | Northrop Grumman Systems Corporation |
AS108-05-17 | Avibank Mfg., Inc. |
VP1119-5-17 | Alcoa Global Fasteners, Inc. |