NSN 5305-00-151-8644
High Torque Screw
Retaining balls in shank.
Manufacturer part number AS108-04-30 for national stock number 5305001518644.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-8644.
-
MPN or Model
AS108-04-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 2.293 inches and 2.313 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.081 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.875 inches and 1.891 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.216 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-019-7273 MPN 123W10858-503Wing Door Assembly
- 4820-00-024-4693 MPN GV500LT20BBCheck Valve
- 5945-00-063-4438 MPN GR13GA1Electromagnetic Relay
- 5935-00-079-0080 MPN GC810MH4Electrical Plug Connector
- 1560-00-157-6728 MPN 128WP10029-31Radome Assembly
- 5935-00-167-7811 MPN GC800PJ2207PElectrical Plug Connector
- 5905-00-168-9314 MPN 128SCAV620-9Nonprecision Wire Wound Variable Resistor
- 1560-00-174-8597 MPN 128GSR4-302Fi Installation Kit
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-8644 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS108-04-30 | Avibank Mfg., Inc. |
VP1119-4-30 | Alcoa Global Fasteners, Inc. |
CA2630-0430 | Arconic Global Fasteners & Rings, |
GB511AE4-30 | Northrop Grumman Systems Corporation |