NSN 5305-00-151-8658
High Torque Screw
Color tan,surface of head.
Manufacturer part number BM19070-4-741 for national stock number 5305001518658.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-8658.
-
MPN or Model
BM19070-4-741
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.329 inches and 0.389 inches -
Fastener Length
Between 1.024 inches and 1.054 inches -
Head Style
Flat countersunk -
Head Diameter
0.357 inches -
Grip Diameter
Between 0.2540 inches and 0.2550 inches -
Internal Drive Style
Slot -
End Application
W/s: aircraft, prowler ea-6b -
Thread Diameter
0.250 inches -
Grip Length
Between 0.665 inches and 0.695 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
33.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4037 -
Material Specification
Aisi assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-512-8356 MPN 3M1170C3-8AFClose Tolerance Screw
- 5305-01-591-0080 MPN ST3M557-10-10Close Tolerance Screw
- 5306-01-089-6009 MPN 20-057-5-30DShear Bolt
- 5306-01-562-4402 MPN 20-057C5-33DShear Bolt
- 5306-01-603-1946 MPN 3M1275E6D13ALClose Tolerance Bolt
- 5320-00-084-1837 MPN HLT641TL6-6Pin-rivet
- 5320-01-130-7832 MPN HP4758-6-12Pin-rivet
- 5320-01-146-5857 MPN HP4813-5-13Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-8658 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM19070-4-741 | Huck International, Inc. |
PBF1286-741 | Sps Technologies, Llc |
GS551P4-741 | Northrop Grumman Systems Corporation |
GS551P-741 | Heartland Precision Fasteners, Inc. |
GS551P4-741 | Dolly Mfg Corp |
HP6551P4-741 | Dolly Mfg Corp |
2R1863-1 | Bfgoodrich Co The |
2R1465-10 | Bfgoodrich Co The |
BM19070-4-741 | Huck Intl Inc |
BM19049-4-741 | Huck Intl Inc |