NSN 5305-00-151-8659
High Torque Screw
Color yellow,half surface or head.
Manufacturer part number BM19070-4-801 for national stock number 5305001518659.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-8659.
-
MPN or Model
BM19070-4-801
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.386 inches and 0.446 inches -
Fastener Length
Between 1.141 inches and 1.171 inches -
Head Style
Flat countersunk -
Head Diameter
0.357 inches -
Grip Diameter
Between 0.2540 inches and 0.2550 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.725 inches and 0.755 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
33.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4037 -
Material Specification
Aisi assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 6110-01-161-6501 MPN 4S1744Pressurization System Dome Panel
- 5305-00-061-6349 MPN 2R1543-8Shoulder Screw
- 5305-00-182-9410 MPN CVC241A4-20Machine Screw
- 5305-00-310-6079 MPN E125-305Machine Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-00-905-8883 MPN NAS1190-02P16NSocket Head Cap Screw
- 5305-01-010-2364 MPN HT4016-4-7XShoulder Screw
- 5305-01-014-6151 MPN S5008-3-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-8659 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM19070-4-801 | Huck International, Inc. |
PBF1286-801 | Sps Technologies, Llc |
GS551P4-801 | Northrop Grumman Systems Corporation |
GS551P4-801 | Dolly Mfg Corp |
GS551P4-801 | Bfgoodrich Co The |
2R1465-11 | Bfgoodrich Co The |
BM19070-4-801 | Huck Intl Inc |