NSN 5305-00-151-8677
High Torque Screw
Retaining balls in shank.
Manufacturer part number CA2630-05-66 for national stock number 5305001518677.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-8677.
-
MPN or Model
CA2630-05-66
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 4.559 inches and 4.579 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.081 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 4.125 inches and 4.141 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.482 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-001-3142 MPN GS837CP1Push Switch
- 1560-00-003-9106 MPN A51P60243-11Drain Pan Filler
- 1560-00-004-3073 MPN A51P61064-3Shut Off Valve Shield
- 5935-00-032-9531 MPN GC805CNH212BNElectrical Receptacle Connector Body
- 4920-00-060-1001 MPN A51V20513-11Boresight Alignment Cap
- 5935-00-063-5281 MPN GA800A1BConnector Adapter
- 1560-00-148-8934 MPN A51B20204-17Aircraft Fairing
- 1560-00-169-2845 MPN 88728Cowling Flap
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-8677 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2630-05-66 | Arconic Global Fasteners & Rings, |
AS108-04-66 | Avibank Mfg., Inc. |
VP1119-4-66 | Alcoa Global Fasteners, Inc. |
CA2630-0466 | Arconic Global Fasteners & Rings, |
MS3369B466 | National Aerospace Standards |
GB511AE3-04-66 | Northrop Grumman Systems Corporation |
MS3369B466 | Military Standards |