NSN 5305-00-151-8688
High Torque Screw
Retaining balls in shank.
Manufacturer part number CA2630-04-11 for national stock number 5305001518688.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-8688.
-
MPN or Model
CA2630-04-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.106 inches and 1.126 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.081 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.688 inches and 0.704 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.029 inches first hole -
Surface Finish
63.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-042-7034 MPN GS836CC1EToggle Switch
- 1560-00-066-6200 MPN 123P10333-1Nace Panel Assembly
- 5935-00-119-3201 MPN GC800AKJ22-55SWElectrical Plug Connector
- 1680-00-141-5708 MPN 128AVP10282-5Panel Assembly
- 1560-00-180-4335 MPN 123EC10181-505Air Conditioning Duct Assembly
- 5940-00-204-8990 MPN GT805D10-06Lug Terminal
- 5935-00-261-8025 MPN GA800TF3B16-16Electrical Connector Backshell
- 5905-00-357-3201 MPN GR816ET103JYNonprecision Nonwire Wound Variable Resistor
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-8688 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2630-04-11 | Arconic Global Fasteners & Rings, |
AS108-04-11 | Avibank Mfg., Inc. |
VP19-4-11 | Alcoa Global Fasteners, Inc. |
CA23630-04-11 | Arconic Global Fasteners & Rings, |
GB511AE3-04-11 | Northrop Grumman Systems Corporation |
CA2630-04-11 | Arconic Global Fasteners & Rings, |
AS108-04-11 | Avibank Mfg., Inc. |
VP19-4-11 | Alcoa Global Fasteners, Inc. |
GB511AE3-04-11 | Northrop Grumman Systems Corporation |
CA23630-04-11 | Arconic Global Fasteners & Rings, |