NSN 5305-00-151-8690
High Torque Screw
Retaining balls in shank.
Manufacturer part number CA2630-0413 for national stock number 5305001518690.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-8690.
-
MPN or Model
CA2630-0413
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.278 inches and 0.329 inches -
Fastener Length
Between 1.231 inches and 1.251 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.081 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.812 inches and 0.828 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.153 inches first hole -
Surface Finish
63.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-001-7357 MPN GA800PC24-11Electrical Connector Backshell
- 1560-00-003-3948 MPN A51B45572-2H Fitting Assembly
- 1680-00-075-3632 MPN GM510GRearview Mirror Assembly
- 1560-00-077-2204 MPN 128WM10454-1Cover Assembly
- 5930-00-152-8834 MPN GS836CJ21-1Toggle Switch
- 1560-00-166-0510 MPN 89358Y Connection Asy
- 1560-00-238-7062 MPN 1128WP40008-23Door Fairing Assy
- 1560-00-278-3939 MPN 123WP10002-3Scoop Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-8690 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2630-0413 | Arconic Global Fasteners & Rings, |
AS108-04-13 | Avibank Mfg., Inc. |
VP119-4-13 | Alcoa Global Fasteners, Inc. |
GB511AE3-04-13 | Northrop Grumman Systems Corporation |
CA2630-0413 | Arconic Global Fasteners & Rings, |
AS108-04-13 | Avibank Mfg., Inc. |
VP119-4-13 | Alcoa Global Fasteners, Inc. |
GB511AE3-04-13 | Northrop Grumman Systems Corporation |