NSN 5305-00-151-9819
High Torque Screw
Retaining element in shank.
Manufacturer part number CA2630-0476 for national stock number 5305001519819.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-9819.
-
MPN or Model
CA2630-0476
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 5.168 inches and 5.188 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 4.750 inches and 4.766 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.083 inches and 5.099 inches first hole -
Surface Finish
63.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-006-0568 MPN A51B92725-21Pin Latch Cover
- 1560-00-008-3566 MPN 123CM12016-502Bell Crank Cluster
- 5935-00-033-9514 MPN GC860EF158P1Electrical Connector Cover
- 1560-00-046-7990 MPN G194-1Aircraft Structural Component Fitting
- 5935-00-059-1384 MPN GC15A2A12S6PElectrical Receptacle Connector
- 5935-00-059-1388 MPN GC15A4P28-15SElectrical Plug Connector
- 1560-00-146-2219 MPN 1128B40900-5Aircraft Access Door
- 5935-00-152-9571 MPN GS806EG14Plug-in Electronic Components Socket
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-9819 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2630-0476 | Arconic Global Fasteners & Rings, |
AS108-04-76 | Avibank Mfg., Inc. |
VP1119-4-76 | Alcoa Global Fasteners, Inc. |
GB511AE4-76 | Northrop Grumman Systems Corporation |
CA2630-0476 | Arconic Global Fasteners & Rings, |
GB511AE4-76 | Northrop Grumman Systems Corporation |
AS108-04-76 | Avibank Mfg., Inc. |
VP1119-4-76 | Alcoa Global Fasteners, Inc. |