NSN 5305-00-151-9930
High Torque Screw
Between 1.710 inches and 1.757 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number SFT22-5A22 for national stock number 5305001519930.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-151-9930.
-
MPN or Model
SFT22-5A22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.325 inches and 0.392 inches -
Fastener Length
Between 1.710 inches and 1.757 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Material Specification
Sps-m-107, standard pressed steel co mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-150-0847 MPN NAS1189E06T241Socket Head Cap Screw
- 5305-00-462-5132 MPN NAS1134V8Close Tolerance Screw
- 5305-00-680-5428 MPN NAS1203-46Close Tolerance Screw
- 5305-01-004-9528 MPN HT4027-3-3Close Tolerance Screw
- 5305-01-412-7535 MPN 12439-4-20Close Tolerance Screw
- 5305-01-462-6144 MPN G382296-53Socket Head Cap Screw
- 5305-01-519-8254 MPN BACS12ER3K12Machine Screw
- 5305-01-592-1111 MPN BACS12FA3K11BKMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-151-9930 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFT22-5A22 | Sps Technologies, Llc |
SFH22-5A22 | Sps Technologies, Llc |
SFT22-5A22 | Sps Technologies, Llc |
SFT22-5A22 | Sps Technologies, Llc |
SFH22-5A22 | Sps Technologies, Llc |
SFT22-5A22 | Sps Technologies, Llc |