NSN 5305-00-156-2858
Bolt Stove
0.875 inches fastener length, flat countersunk head style, between 0.200 inches and 0.225 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505-4R14 for national stock number 5305001562858.
Datasheet
-
Product description
Machine Screw NSN 5305-00-156-2858.
-
MPN or Model
AN505-4R14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.825 inches and 0.875 inches -
Fastener Length
0.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.200 inches and 0.225 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel or steel comp 1010 -
Screw Material Specification
Qq-s-630 federal specification 2nd material response or qq-s-631 federal specification 2nd material response or qq-s-634 federal specification 2nd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-151-9283 MPN 515722-1Rotary Switch
- 5940-00-163-1463 MPN N2562-43790-1Terminal Board
- 5930-00-431-6920 MPN 510532-1Switch Subassembly
- 5930-00-548-7972 MPN 401364Sensitive Switch
- 5950-00-153-0932 MPN 418951-1Power Transformer
- 6110-01-302-0149 MPN 622316-1Remote Switching Control
- 5305-00-156-2810 MPN 1175-10-5Machine Screw
- 5305-00-479-4080 MPN 509441-47Socket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-156-2858 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505-4R14 | Aeronautical Standards Group |
FFS92 | Federal Specifications |
NAF1175-4-14 | Naval Air Warfare Center Aircraft |
505-4R14 | Air Force-navy Aeronautical |