NSN 5305-00-159-2864
High Torque Screw
Between 1.298 inches and 1.328 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1155V15 for national stock number 5305001592864.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-159-2864.
-
MPN or Model
NAS1155V15
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 1.298 inches and 1.328 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Thread Series Designator
Unjf -
Specification Data
80205-na+1155 professional/industrial association standard
More from these suppliers
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-005-0655 MPN NAS1151E3Close Tolerance Screw
- 5305-00-071-1764 MPN MS90725-104Hexagon Head Cap Screw
- 5305-00-146-5761 MPN AN565FC8H16Setscrew
- 5305-00-149-9949 MPN NAS334A17Socket Head Cap Screw
- 5305-00-253-5621 MPN MS21318-30Drive Screw
- 5305-00-282-3622 MPN NAS334PA12Machine Screw
- 5305-00-282-8757 MPN NAS224-13Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-159-2864 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155V15 | National Aerospace Standards |