NSN 5305-00-162-4816
High Torque Screw
Between 1.198 inches and 1.245 inches fastener length, flat countersunk head style, between 0.377 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 51B333-15S for national stock number 5305001624816.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-162-4816.
-
MPN or Model
51B333-15S
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 1.198 inches and 1.245 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.377 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-8844 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Tin -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-163-3368 MPN 14-40900-1Sensitive Switch
- 1680-00-220-5816 MPN 6-70020-3Int Panel Assemlby
- 1560-00-479-9350 MPN 3-10811-107Aircraft Structural Component Support
- 4920-00-951-0957 MPN 3-76226-1Housing Arb Adapter
- 4920-01-056-9689 MPN 2-76515-57Track Assembly
- 5975-01-072-9646 MPN 10S300-2-47Electrical Components Tiedown Strap
- 1560-01-631-8574 MPN 2-11412-13Longeron
- 5305-00-948-0764 MPN 51B333-5SMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-162-4816 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B333-15S | Northrop Grumman Technical Services, |
51B333-15S | Northrop Grumman Systems Corporation |