NSN 5305-00-163-2690
High Torque Screw
Between 0.837 inches and 0.867 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number VT1662-4-6 for national stock number 5305001632690.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-163-2690.
-
MPN or Model
VT1662-4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.452 inches and 0.502 inches -
Fastener Length
Between 0.837 inches and 0.867 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
4.60 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-283-2641 MPN 12S901-811Aircraft Door
- 1560-00-450-2594 MPN 12C103-805Aircraft Structural Component Support
- 5930-00-465-8338 MPN C4222-6Switch Guard
- 1560-00-494-4254 MPN 12W2310-820Slat Nose Assembly
- 1560-00-586-3955 MPN 12H1989-3Oil Cooler Inlet Duct Assembly
- 1560-00-724-5104 MPN 12P10417-2Shroud Shield Assembly
- 1680-00-869-2561 MPN 12S702-4Remote Control Lever
- 1560-00-906-2918 MPN 540P1002-3Tailpipe Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-163-2690 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1662-4-6 | Alcoa Global Fasteners, Inc. |
C4563-4-6 | Lockheed Martin Corporation |