NSN 5305-00-164-1363
High Torque Screw
Between 2.183 inches and 2.213 inches fastener length, flat countersunk head style, 1.214 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number NAS2810-22 for national stock number 5305001641363.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-164-1363.
-
MPN or Model
NAS2810-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.798 inches and 0.848 inches -
Fastener Length
Between 2.183 inches and 2.213 inches -
Head Style
Flat countersunk -
Head Diameter
1.214 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.615 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches top of head -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas2810 professional/industrial association standard
More from these suppliers
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-068-0499 MPN MS90725-2Hexagon Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-137-6549 MPN NAS1634-1Machine Screw
- 5305-00-143-2059 MPN NAS1352C8LN48Socket Head Cap Screw
- 5305-00-150-0825 MPN NAS604-11PMachine Screw
- 5305-00-150-9592 MPN MILS7839Machine Screw
- 5305-00-163-6802 MPN NAS1121E15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-164-1363 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2810-22 | National Aerospace Standards |